MRV Communications AE092FCAKA Especificações descarregar pdf (Página 40)

Installing the LX Series

451-0308

Accessing from a Terminal Attached to an LX Series Serial Port

Use the following procedure to access the command line interface port from

a dumb terminal attached to an LX Series serial port, which is set for

access local, or dynamic:

1. Hit the return key several times to autobaud (if autobaud is enabled)

the port and get the Login: prompt.

2. Enter your login name. The default is InReach.

3. Enter your password. The default is access.

Additional Considerations

Other considerations include the following:

• Setting up users

• Authentication/Security

• Configuring modem settings

For further information on these issues, refer to the LX-Series Commands

Reference Guide, and to the Support area of the MRV website at

www.mrv.com.

Sensor (Temperature/Humidity) Ports

You can configure ports to act as temperature and humidity monitors when

connected to an In-Reach Temperature/Humidity Sensor. The Temperature/

Humidity Sensor provides an accurate measurement of the temperature/

humidity in the area in which your LX Series unit is placed.

The following section explains how to connect and install the sensor.

Connecting the Temperature/Humidity Sensor

A 10’ Male RJ-45 to Male RJ-45 straight-through cable (P/N MX-151-3027)

connects the temperature/humidity sensor to an LX async port. The LX

unit can be configured to support the sensor on any async port other than

the DIAG port (port 0).

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 68 69

Sem comentários

MRV Communications AE092FCAKA Especificações Página 40